Product Description
The double-layer trapezoidal tile pressing machine integrates two-layer forming systems in a relatively compact body, which occupies a smaller area than two single-layer tile pressing machines. In the case of limited factory space, the double-layer tile pressing machine can make more effective use of space, reduce the occupation of production space, and reduce the site rental cost of the enterprise.
Main Technical Parameters
| Material | Type | PPGI/GI |
| Thickness | 0.3-0.6mm |
| Width | 1200mm |
| Roller Stations | 12/15Stations |
| Roller & Shaft Material | 45# Steel Quenching and Plating |
| Diameter of Shaft | Φ70mm |
| Cutter Material | CR12 |
| Drive Type | Chain Drive |
| Speed | 15m/min |
| Total Power | 5.5+5.5KW |
| Voltage | 380V 50Hz 3Phases |
Working Flow
Decoiling → Material Feeding → Roll Forming → Cutting → Collecting
Component & Technical Parameters
This part is used to support Coil.
And make the coil in a rotary way.
Bearing capacity: 5T
Inner diameter: 470-530mm
Uncoilers play an indispensable role in the production process of tile presses. In the production process of tile presses, metal sheets are usually supplied in the form of coils, and the primary function of the uncoiler is to smoothly and steadily unwind these tightly wound metal sheets.
Hydraulic Pump Station
When the equipment encounters abnormal resistance or excessive pressure, it can automatically adjust the pressure of the hydraulic system to avoid damage to the equipment due to overload, thereby improving the reliability and stability of the floor deck forming machine.
Touch Screen Control Cabinet
The control cabinet has two modes, automatic and manual modes.
The unit length of the targeted sheet and quantity can be set in the touchscreen.
The system is simple and easy to operate.
Feeding Table & Pre-Cutter
The bracket of the feeding table provides a stable support structure for the entire feeding mechanism, ensuring the position accuracy of each component during the feeding process. The conveyor roller is installed on the bracket to carry and convey the metal sheet.
Shaft & Roller
During the tile pressing process, the rollers apply pressure to the sheet material and cause it to undergo plastic deformation. By precisely controlling the movement and spacing of the rollers, it is ensured that the processed trapezoidal tiles meet the prescribed dimensional standards in terms of length, width, corrugated height and spacing, thus ensuring product consistency and interchangeability.
Pressing Section & Cutter
The cutting speed of the cutter can usually be adjusted according to the operating speed of the tile press and the material of the board to achieve the best production rhythm. For example, for thinner boards, the cutter can complete the cutting action faster, while for thicker boards, the cutting speed is adjusted appropriately to ensure the cutting quality without affecting production efficiency.
|
|
Roof Sheet Double Deck Roll Forming Machine Images
|
